1 / 2
Gulfcoast Robotics LED Light Bar Dimmer Switch Mount - Offset Side Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts off to the side of the top x-axis rail.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The mount Gulfcoast Robotics provides is intended to go on the back of the vertical rails, but I don't have space for that. At the same time, it can't go too far from the LED bar because the length of cable is pretty short.
Prints with the top surface on the bed. Supports are not required, as long as you can bridge reasonably well. It's something like a 2-3 inch span and if the bridge layers sag too much, you may not be able to get the switch in.
Attaches with 2 M5x8 screws and t-nuts.