X-Acto Knife and Blades Holder with Magnetic Closure and Retention
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box has space for 2 handles and something like 40 #11 blades.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 67
- Makes
- 0
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This box has space for 2 handles and something like 40 #11 blades. The lid is held closed by small disc magnets and the blades are held in place by much stronger magnets below. There are three points during the print where you will want to pause to insert the magnets. If you don't want to use the magnets the print should turn out fine just leaving them out.
Uses 8 - 8mmx1mm rounds https://www.umagnets.com/p/disc-magnet-n50-8mm-x-1mm-nickel-plated/
and
4 - 20mmx6mmx2mm (https://www.umagnets.com/p/20mmx6mmx2mm-thick-neodymium-block-magnet-n35-thin-magnets-super-strong-rectangular-rare-earth-flat-magnets-20-x-6-x-2mm/)
Note that my disc magnets actually measure 0.9mm, and the tolerances on this design are pretty tight.