1 / 8
Kobra max, Tensioner and mount for 12mm belts with the linear rail mod — image 1
1 / 8

Kobra max, Tensioner and mount for 12mm belts with the linear rail mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

with the 12mm belts and linear rails, you will need to move the belt path

Rating
0 / 5
Likes
13
Downloads
70
Makes
0
Views
1,001
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

you have a choice to manufacture all or to buy 2040 profiles, tensioners and then modify

you will need 12mm pulley with a 5mm bore for the tensioner side and a 12mm pulley with an 8mm bore for the motor side (x2)

For the manufactured version you will need also, 5h7 x 40mm pins (x2)

if you choose to modify the 2040, you will need to remove the upper mid section of the profile and drill 6x 3.2mm holes to be able to mount it to the kobra max frame (see picture/model)

you can then purchase some 2040 tensioners similar to the ones in the model.. but you will have to widen the slot to accept the new 12mm pulley. 

when mounting, the distance between the original extrusion to the new tensioner rail should be 16mm, you can print a 16mm block as a tool to help you get the position. Printing 2 will be enough, just fit one at a time.  

 

Tags