Stargate Goa'uld Hatak - Sliced
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model as been cut into several sections for an easier print. The rim is separated for the pyramid.
- Rating
- 0 / 5
- Likes
- 103
- Downloads
- 499
- Makes
- 2
- Views
- 2,521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This model as been cut into several sections for an easier print.
The rim is separated for the pyramid. This makes it possible to print them in different color.
The rim section connects via the 3 stud to the pyramid section.
Fist glue the rim together and dry-fit it in between the pyramid peaces. When the sections of the pyramid lineup glue them together was well with the rim in place.
The parts of the pyramid line up with FilaPins. You will need 3 peaces of 1,75mm filament.
For display an stand has been added to the model. It requires a peace of 3mm transparent filament. The base shows the emblem of the Goa'uld Apophis.
Credits go to chrisb3d fixed model of Hat'ak:
https://www.thingiverse.com/thing:2569849
And to Mike1701 for the original model:
https://www.thingiverse.com/thing:418718
Printed with 0.4mm nozzle; 0.15mm Layer hight; 2 wall lines; 15% infill