Elegant kitchen wall SPICES STORAGE [special hook / screw holes]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder and storage for spices jars.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 22
- Makes
- 0
- Views
- 639
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Designed to hold up 2 rows of 4 spices jars of a specific size.
Inside width 245 mm, modeled to fit in jars up to 82mm in diameter with a special cutout. Can be remodeled to hold fully circled jars. See the profile model image with dimensions.
Cut in PrusaSlicer: The storage was too big to print on MK4 so I cut it in halves in PrusaSlicer and used the connectors (see the screenshot how to do it). You can play with the connectors where to place them and how big they should be - the default ones should be ok, please make sure to place them roughly where indicated.
Position: Print both parts on the side for the correct print of the modeled hook.
Assembly: push both parts together. The cutout is modeled with a stop on the left side so it doesn't slide through. For longer durability you can glue parts.
Supports: not needed
Nozzle: 0.4
Layer Height: 0.30
Infill: 15%.
Printed with: Prusa MK4, Prusament PLA Galaxy Black
Print time: 9h 11m + 9h 12m
UPDATE: “spices jar holder - screws.3mf”
Publishing a model without the special hook but with screw holes instead. Please use this one for a regular wooden kitchen wall.