1 / 6
Stacking/Stackable/Stack AMS Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stack multiple AMS units securely on top of an X1C. Prints on a single plate. Open source, CAD files available
- Rating
- 4.923 / 5
- Likes
- 185
- Downloads
- 1,078
- Makes
- 11
- Views
- 10,549
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clean and simple reimplementation of a popular stand for the BambuLabs AMS unit
Why pick this model:
- Securely stack multiple AMS units on top of an X1C
- Fusion and STEP files are available, remixes welcomed
- Ready to use after printing one plate. Additional plates add rigidity
- The handles make it easy to move the AMS stack as a unit
- The lower AMS is fully accessible, the lid can open to swap filament
Print settings:
- I used "0.16mm Optimal" in BambuSlicer with two walls and 3% cubic infill, 4 walls for the dowels
- Print 1x of the side panel plate
- Print up to 3x of the optional cross bracing plate
Materials:
- I used Polyterra draft PLA
Assembly instructions:
- Maybe glue the cross bracing dowels in place to make it stiffer? I didn’t and so far it seems fine
- If stacking more than two AMSs replace foot.stl with https://www.printables.com/model/620507-stackingstackablestack-ams-shelf-modified-footstl- for the upper tiers
Change log
- 2023-08-29
- Initial release
How to contribute:
- Post your make, it keeps me motivated to improve the model when I see people using it!
- Post your feedback, idea or remix in the comments!
Credits:
- MihaiDesigns for the original model on Thangs
- 3DMON@3DMON_604296 for bringing the design to Printables
- @Hifihedgehog_617593 for remixing foot.stl