'97 Diahatsu Hijet S110P Dash 3D Scan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P. These are cleaned up and simplified meshes, I had to perform quite a bit of post processing since the source files were hundreds of megabytes. I used MeshLab to clean them up using the “Surface Reconstruction: Screened Poisson” feature to turn the broken surface and point cloud into a watertight mesh. I did cover all clear and glossy surfaces with painters tape, so there are some creases. Overall the data is good and the couple test prints that I have done fit.
I am planning to use these surfaces to model several accessories for the truck, like gauge clusters, phone mounts, speaker boxes, etc…
I am still learning to work with meshes in Fusion360 so I haven't made much progress. I figured I should post these and see what items others come up with.
I do have the original files if you want to have a go with converting them, just send me a message and we can figure out how to share them.
Scanned using a Hexagon Absolute Arm 85