Seeed Studio XIAO nRF52840
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A CAD asset for the makers
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 748
- Makes
- 0
- Views
- 2,055
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product page for this device can be found here.
It is intended for makers building electronics to include in their design process, as it removes the extensive process of measuring this part to fit when designing your wonderful lamps/clocks/robots/etc.
If you build something and use this as an asset, please make me happy by posting it in the makes section!
Tolerances
When designing things using this model in my experience adding 0.2mm around the board will lead to a tight fit that holds the device in place. However, your boards may have slight differences depending on the batch, or perhaps your printer settings will mean more or less of a gap is needed. 0.2mm is probably a good starting point.
It is suggested that a 0.4mm gap is placed around the USB-C port, as this should not be a very tight fit.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨