Wheelchair iphone holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an iphone holder that fits into iLevel wheelchair accessory rails and puts the phone in a convenient position.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 57
- Makes
- 0
- Views
- 1,157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
This is an iPhone holder that fits into iLevel wheelchair accessory rails and puts the phone in a convenient position. Fits iPhones 11-13 (the smaller versions).
Print in 2 parts and glue. The hooks on the lower part are for a ‘grabber’ device that many wheelchair users use to pick things up off the ground. They act as a holster for the grabber.
The device is designed to be movable. see video here - https://drive.google.com/file/d/1FZWmB4vmgSuM9OL8MLsxgmyOAq4Uqln2/view?usp=sharing
The user pushes the top portion forward and the holder slides forward and falls out of the way 45 degrees to allow the user to go under a table.
The base portion must be printed standing on the front or back end of the rail insert (see photo). The movement is ‘print in place’
Print with 3 shells and 25% infill. The screw must be printed at 100% infill.