Worktable lamp stem tensioner for Ikea TERTIAL and similiar
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.57 – €1.92 net (excluding VAT)
For file: lampholder_0.4n_0.15mm_PETG_MK3S_2h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 2.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple bracket designed to keep the lamp's lower arm straight
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 57
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
If you own a lamp like this, you know how over time the springs on the stem get tired and no longer keep the lamp straight. This is a simple bracket designed to keep the lower arm straight, so it doesn't scratch the wall behind it.
The nut is M11 while the bolt is M10 to allow higher success rate with bad printers.
I used these settings:
- 0,15 mm layer height “QUALITY” setting
- PETG (~16 g / 4,8 m)
- 25% infill
- Min. perimeters 3
- External perimeters first
- No supports