Lithophane Moon Lamp 124% Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The biggest moon lamp you can print in one piece on a Bambu Labs x1c.
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 808
- Makes
- 4
- Views
- 3,783
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I printed the original moon lamp by @FrankDeschner but it met an unfortunate faith when my daughter knocked it onto the floor.
So i decided to rebuild it…Bigger…Better…More stable!
My printer has a build volume of 256*256*256, which roughly equates to the original globe scaled up by 124%.
I thought i could improve the stability and child proofing factor by adding more weight to the legs, ie designing a whole new base for the globe. Also, just scaling up the legs wouldn't work as the hole for the bulb fitting would also be scaled up. I remixed the original tripod legs into a sturdier construction and hey presto…moon lamp 2.0.
Inside is the following lamp fitting:
https://www.clasohlson.com/se/Lamphållare-med-tygklädd-sladd-Northlight/p/36-6234
and an Ikea Trådfri e27 RGB light bulb.
The globe was printed with 6 walls, 6 top layers, 6 bottom layers and no infill. This is almost a 2 day print even on the BL.
The stand was printed with 5 walls, 5 top layers, 5 bottom layers and 15% infill.
Happy printing!