1 / 1
Ivar-Mount for Skadis-board with Standoffs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rework of the mount by u.s.e. because I had trouble getting the boards to fit with the original design.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
- Simplified the shape to make it more symmetrical. Print the adapter twice and and orient the holes so they are closer to each other when attaching the top and bottom standoffs
- I had to drill down the holes for the Ivar-Pegs a bit, so there was enough space for the metal pegs, but if you're not planning on hanging anything heavy, try these printed pegs, they're a bit shorter
- Also designed a connector that combines two horizontal connectors for more rigidity and also adds some Skadis-Holes to the back of the board