Tea-Lighthouse 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of a lighthouse that has a spot for a tea light to be placed in the top.
- Rating
- 4.5 / 5
- Likes
- 48
- Downloads
- 172
- Makes
- 2
- Views
- 893
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a lighthouse that has a spot in the top where a tea light can sit. This allows light to come out of the top of the lighthouse. The tea lights that I used have a base diameter of 1.4in and a height of 1.6in.
I printed parts 1-3 with a fuzzy skin modifier with default settings. For all parts I used PLA, a .6mm nozzle, and a .3mm layer height.
For the clear window at the top I used clear PETG, and printed in vase mode with a .45mm layer height and the cooling fan turned off. If you do not have any clear material I uploaded a top that is one piece, but it does require support under the overhang.
I used superglue to attach models 1-3, and also used superglue to attach part 4-6. All of the models have alignment pieces so they should all align together without any issues.
This lighthouse is modeled after Sankaty Head Lighthouse on Nantucket Island, USA.
Tea-Lighthouse 2: https://www.printables.com/model/563735-tea-lighthouse-2
Tea-Lighthouse 3: https://www.printables.com/model/563740-tea-lighthouse-3