12mm LED Par Can Stage Lighting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Par Can light that takes a WS2811 LED Pixel.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 208
- Makes
- 1
- Views
- 1,091
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Modified the light to accept a 12mm addressable WS2811 waterproof pixel instead of the PL9823 LED that was used in the original model. Pixel slides in from the rear and twists to lock in place. Increased clearance for the barndoors to minimize the need for sanding to get them to align with the pins.
Barn door was modified to be twice as thick to increase strength. Barn doors should be printed on their side so that the print layers create a ring around the pin. Printing flat on its back causes a weak point where the pin goes in causing them to break off from the light.
Print the mount from the original model.
The below McMaster Carr links are primarily so you can see exactly what type of equipment you need since they provide tons of details and CAD drawings of their parts.
Required hardware:
- 4x 1.5mm 10mm long steel pin for barn doors McMaster Carr Link
- 2x M2.5 5mm screw for mount McMaster Carr Link
- 1x M2.5 12mm screw for truss hanger (14mm if you don't use a tapered head) McMaster Carr Link
- 1x M2.5 nut for truss hanger McMaster Carr Link
- 1x M2.5 washer for truss hanger McMaster Carr Link