1 / 4
Ikea Tradfri Remote Wall Switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A square wall switch like standard one in europe to put ikea tradfri remote on your wall.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 1
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When i started to use homeassistant in my house, i bought a lot of this ikea tradfri little zigbee remote switches because they were pretty cheap and easy to use without messing with existing wall switch.
I design this part to put them on my wall while look like existing one.
Print settings:
- Layer height: 0.20mm
- Perimeters: 3 minimum
- Solid top and bottom layers : 3 or 4 mini. (I used 3 on my old printer 2 years ago but the infill was visible.)
- Infill: 20% or more.
- Supports: No supports needed.
Instructions:
- Just use one or two pieces of double sided foam tape (like 3m vhb one) on the back of the printed part
- Put the ikea magnetic holder in place with the ikea adhesive and voila !
nb: the hole on the printed part is there to be able to remove with ease the ikea magnetic holder if you need to in the future.
(The photos are from a precedent version, newest version have the fillet correct)