1 / 4
Laundry Soap Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an angled stand for liquid laundry soap.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 217
- Makes
- 1
- Views
- 1,079
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The sharp angle will help the soap pour when it's near the end.
print on the back face for best results (with the lip at the top as pictured). This will leave some top layer steps on the front, if you don't like that, then you can try printing on the front face, but maybe slow it down a bit if you have a bed slinger.
Print time was about 12hrs with 2 walls, 8% infill, .24 layers with adaptive layers turned on with PLA. strength doesn't seem to be an issue, but 3 walls would probably make it look a little better and increase the strength.