1 / 3
Pandora Charm Organizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a Pandora charm organizer
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 732
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Pandora charm organizer in 3 parts.
You need two print the “Pandora_Charm_Body.stl” once and the “Pandora_Plate” twice.
After everythings has been printed you need to add screw on the back of the “Pandora_Plate” you can choose the configuration. For the screw you need to use “Button Head Hex Drive Screw, M3 x 0.50 mm Thread, 16mm Long” I added than some heat shrink for protecting the charms.
Lastly you can screw the “Pandora_Plate” in the body with 4 screws for each plate. (Low-Profile Socket - M3x6)