1 / 1
Night Dragon (Filament Painting) - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 111
- Makes
- 4
- Views
- 795
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Night Dragon filament painting created in HueForge.
Printing instructions:
Filament swaps ONLY, no MMU or AMS required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
It is best to disable z-hop to eliminate as much stringing as possible.
You can use same filaments as I did or you can experiment with your own.
Don't forget to upload a make!
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.3
- PLA Aurapol Blue Transmission Distance: 6
- PLA R3D Light Blue Transmission Distance: 3.5
- PLA BambuLab Basic Jade White Transmission Distance: 12
Swap Instructions:
- Start with Black
- At layer #7 (0.64mm) swap to Blue
- At layer #13 (1.12mm) swap to Light Blue
- At layer #18 (1.52mm) swap to Jade White for the rest.