Fanatec BMW Shift Knob Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to use an OEM BMW shift knob with my Fanatec Shifter, but I couldn't find an adapter to go from the M12…
- Rating
- 3 / 5
- Likes
- 10
- Downloads
- 132
- Makes
- 1
- Views
- 1,465
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I wanted to use an OEM BMW shift knob with my Fanatec Shifter, but I couldn't find an adapter to go from the M12 thread on the shifter to the BMW slip rod. I took some measurements and created this, which screws on to the Fanatec shift lever and then the BMW knob pressure fits on top. It's a pretty tight fit, and the BMW knob doesn't move or turn when using it.
I printed this using 100% infill which is probably not necessary, but I wanted to make sure it was strong. I used PETG however my guess is PLA would also work just fine.
No supports necessary, printed with the threaded portion on the build plate.
WARNING/DISCLAIMER: This was not designed for use in a real car. If you try to use it in a real car, I'm not responsible if it breaks or comes loose. If it breaks on a racing simulator that will be annoying, but not potentially life-threatening.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
100%
Filament: Overture PETG Black
Notes:
Photos shown are made with Prusament Orange PETG for prototyping, but my final print that I use on my rig is in black. Frankly the orange would be fine as you only see a tiny bit of it from the bottom.
Category: Automotive