1 / 9
DESTINY 2 IKELOS HAND CANON
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKELOS - SCALE TO 80% BEFORE PRINTING
- Rating
- 4 / 5
- Likes
- 154
- Downloads
- 347
- Makes
- 1
- Views
- 2,291
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
All new model with some tight tolerances. You'll need some two core wire, a couple of cable ties and pins for the trigger, winglets, and breach pin. Add a small spring to the trigger and a tiny bit of compressible foam to the breach pin socket (See Photo).
Only instructions are:
- Don't glue the chamber, let it rotate on the pin (Photo 2)
- Insert the trigger spring and trigger before fitting the grip (Photo 3)
- Build the barrel, breach, chamber pin and chamber as a complete unit before fitting it into the frame
- Pack a small bit of foam into the breach pin socket to push the pin against the chamber (Photo4)
Check the photos to understand the process