Screwgate Carabiner (Print-in-place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for a screwgate print-in-place carabiner and didn't find it, so I made it
- Rating
- 5 / 5
- Likes
- 279
- Downloads
- 964
- Makes
- 8
- Views
- 3,426
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
⚠ This model requires a very accurate printer and good bed adhesion
I made this fun print in place model to hook things. I added a sping back action to feel like a real carabiner.
After printing, I recommend unlocking the screw first, and then forcing the gate open gently should free the parts.
Print settings :
Layer height : 0.2mm
First layer : if you don't have perfect first layer adhesion, I would recommend using a raft
Print orientation : the STL is already oriented
Print time : around 1h on my prusa mk3s
Bonus (optional) :
I added an optional piece to glue on if you want to complete the screw part.
Note that the little hole should be facing up the carabiner in order for the thread to be perfectly aligned (as shown below).
I guess it is not technicaly print in place if you add this piece but nevermind
And obviously this is not for climbing 😅