M12 x 1 Master Cylinder bench bleed adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M12x1 threaded adapter to bench bleed master cylinder. Made to fit 2011 Toyota Tundra part number 47201-0C071.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 84
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Remix of model made by @InducedRug_217669. I shortened the extension off the end of the threads to ensure enough threads can fully engage before contacting the flare, and enlarged and added barbs to the hose adapter. Thicker material on the nipple makes it a bit sturdier as well.
The nut uses a 16mm wrench. Nipple accepts 6-7mm or ¼" ID flex tubing.
Printed in PLA, .15mm layer height using “quality” setting, I printed a pair in 1 hr 20 min on my Mini+. Supports are required but printed nicely using PrusaSlicer's paint-on feature.