Updated Stacked Pumpkin Lantern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pumpkin decorative votive lantern
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 71
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I took the amazing Lantern design made by Laptop-Guy and made a few fixes he did for future lanterns. My biggest issue with the original was due to how it was assembled one side would end up thicker than the other so I added a 45 to the panels so they fit together better and have an even overall look and adjusting the size to match later lantern designs. In doing this I also had to adjust the base to fit the new dimensions. Finally I made a custom decorative lantern cap for a bit more style. If you don't like the decorative cap print the base twice, or don't use a top, the choice is yours. For joining the panels I recommend double sided tape but you could use glue if you like. For the light inside I have a votive led light or you could use a small led battery operated candle as well. I printed mine in a black pla.
Printing Instructions:
I printed the panels with a .4 nozzle at a .2 layer height with 100% infill.
The base and top I printed with a .4 nozzle at a .2 layer height with 20% infill. The decorative lantern top will require supports.