6-12in Lathe Quick Change Tool Holder Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Tool Holder Wall Mount for a Mini Lathe 6"-12" Quick Change Tool Holder
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 109
- Makes
- 0
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A wall mount for tool holders for 6" - 12" quick change tool post, commonly used with 7"x12" mini lathes.
The wall mount supports tool holder with ~43mm wide, ~9.8mm deep, 60 degree dovetails.
The quick change tool post is commonly marked 250-111 with tool holders labelled 250-101 to 250-110.
The part is intended to be printed upside down (Figure 2) without supports, the angled top of the print is intended to face the wall. The wall mounts uses a pair of 1.5" long 0.25" countersink head wood screws.
The wall mount was designed with 10 degree angle to prevent the tool posts from vibrating out off place.
Some tolerancing may be required.