Mini Hex Sopranino Ukulele (Prusa Mini compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sopranino Hex ukulele. 80% of the original, but remodeled - so it works with 8x2mm CF strips. Suitable for Prusa Mini.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 195
- Makes
- 1
- Views
- 1,119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
Work in progress
All the files are ready, but for now they are in one 3mf and without instructions. So take elements from this 3mf and split into several prints acording to your material, color, etc. Use instructions and hints from original Hex Ukulele.
How it plays?
pretty decent for such a small instrument.
About
This is a remix of my Hex Ukulele. All the parts are scaled down to 80% of the original so you have sopranino scale. Body, neck, and middle-neck have bigger slots so they still can fit 2x8mm Carbon fiber rod. The body part have some improvements in the internal construction so it prints even easier than original model. All parts can fit on oone plate of Prusa MK4/MK3 printer:
All parts individually can also fit on the Prusa Mini:
 |  |  |
For this ukulele I recommend 0.4mm nozzle. Also As the neck is thin I would strongly recommend real Carbon Fiber strip (take 0ne 50cm strip and break it into two 25cm pieces. Other than that- use print and assembly instructions from the original project here.
Tuning:
I would recommend higher tuning. 2-3 semitones up should be perfect. Instead G-C-E-A try A-D-F#-B(H) or A#-D#-G-C