iPhone Stand with Loading Function
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.40 – €6.60 net (excluding VAT)
For file: Base_0.4n_0.15mm_PLA_MK4IS_5h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.00 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 5.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
iPhone loading stand to be used with an (e.g.) Amazon Basics Lightning cable
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 0
- Views
- 427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
The .3mf contains a prepared model. If you are using a different slicer than Prusa Slicer, just split the model in half along the y/z plane and add pegs or similar feature to re-connect the two halves after inserting the cable. On the bottom of the stand you'll find a strain relief groove for the loading cable.
