Basic Pocket Pen (Bock 250 compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pocket Pen with a decent Nib Unit, even smaller than a Kaweco Sport. Fits one standard international Ink cartridge.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 57
- Makes
- 1
- Views
- 919
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As i love EDC (Every Day Carry) and especially Fountain Pens, i was seeking for a decent Pocket Pen.
Found the (full sized) Design by Dinis, tired it… and started to modify/edit his design.
Shorter, longer Cap to have some Room above the Nib. Reworked the Threads.
The Cap is meant to be posted while writing - and it posts very secure and snuggly.
So, here's my Remix:
a Pocket Pen with a decent Nib Unit, even smaller than a Kaweco Sport.
Fits one standard international Ink cartridge.
FDM Printers: Print the body and cap at 0.12mm layer height and the section at 0.08mm
- tried PETG and PLA myself. Fuzzy skin might work, but i prefer clean contures.
SLA/MSLA: works as well, tried it with a friends Elegoo Mars 3 Pro. Just make sure to orient correctly to prevent a vacuum.
The nib units are Bock 250 or #6, and they can thread right into the section but depending on the printer calibration you might need a bit of effort, if that doesn't work you can scale all the parts by a little bit and that makes it easier to fit