Nutribullet Blade Holder Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall-mounted holder for Nutribullet Extractor Cross Blades and Milling Blades
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 1
- Views
- 407
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a wall-mounted holder for Nutribullet Extractor Cross Blades and Milling Blades.
Looking for a holder that can be mounted to a Skadis pegboard instead? Check out the version for Ikea Skadis.
Blade Compatibility
This works with the Nutribullet Extractor Cross Blade and the Milling Blade. Chances are that it also work with the Pro Extractor Cross Blade. Please verify the dimensions of your blade. It works with blades that have a diameter of about 105mm and are about 42mm tall.
Required Hardware
| Qty | Description |
|---|---|
| 2 | 3mm - 4mm countersunk wood screws with a head diameter up to 8mm |
Printing
Print the part in the original orientation. The STLs are pre-rotated for printing.
Recommended settings for 0.4mm nozzle:
- Layer height: 0.2mm
- Extrusion width: 0.4 - 0.45mm
- Perimeters: 4
- Infill: 20%
- Top / bottom solid layers: 4
- Supports: No
Installation
The hole distance is 60mm in case you need to drill pilot holes. Countersunk screws with a head diameter up to 8mm are supported.
