Samson Meteor Pop Filter and Shock Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pop filter and shock mount adapter for the Samson Meteor microphone
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Mesh Material
The mesh is some computer fan filter material from Aliexpress, but any mesh should work so long as it fits in the 0.5mm slot. It is roughly 142mm x 60mm but will need to be tweaked to get a good fit.
Shock Mount Adapter
The outer diameter is 46mm
The thread is 5/8-27, 13mm long (extra for the pop filter)
Hardware
> 6 x M3x10mm screws
> 6 x M3x4mm heat-set inserts
Print Settings
The “Bracket” part requires support where the screws go through, all the other parts are fine without.
The only other thing I would advise is to use 3 or 4 vertical walls on the shock mount adapter for added strength.
The distance from the pop filter to the mic is ~20mm if you're wondering.