1 / 1
Baby bed raiser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to create a raiser for the bed of my son and created this.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 1
- Views
- 339
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
This will raise the baby bed by 14cm. The raise support bed legs with a size of up to 4 by 4 cm.
Printed this on an Ender 3 Pro using eSun PLA +
I used the following settings:
Layer height: 0.2 mm
Wall thickness: 0.8 mm
Infill: 25% with cubic pattern
Nozzle temperature: 200°C
Bed temperature: 40°C
Supports are needed, I used Cura's tree support.
The model is printed upside down to reduce the supports needed to be printed.
I used a raft as well, but this should not be necessary.