1 / 3
Picatinny grips (improved) MIL-STD-1913
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 Improved versions of my earlier Picatinny grips for Airsoft or other uses. Fits a MIL-STD-1913 rail.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 0.4mm nozzle and 0.15-0.2mm layer height. 2.5mm walls and 40% infill at 220°C for maximum strength.
Orient with the rail mount side down. Use a support interface for easy removal. Because of the large surface area, some designs will fit tighter.
Finish off with 2x #10 Socket-Head Cap Screws 1.25 inches long and 2 Nylock nuts