Lenovo P520 Drive Cage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secondary drive cage for Lenovo P520.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 554
- Makes
- 0
- Views
- 3,538
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model.
For a great model to add even more drives in the optical bay, check out this model.
I have created a hard drive cage for the Lenovo P520 Workstation that slots into the secondary drive cage position. The cage supports 2 - 3.5" drives and 1 - 2.5" drive. The bottom slot will only fit a 2.5" drive if you install the drive before you mount the cage in place. The cutouts along the side provide an area to screw mount 3.5" drives. I found it easiest to slide the drives in and slightly bend the mounting cutout towards the drives. Cage mounting holes can be used to directly screw the cage to the side of the case or are perfect for aligning brass inserts.
Print vertically (default model orientation), printed on a Creality Ender 3 S1, 0.4mm nozzle, 0.2mm layer height, no supports needed. Added the design file for Fusion360. Please share and remix!