人民币一元硬币的魔术道具 Magic props for RMB one yuan coin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
人民币一元硬币的魔术道具 Magic props for RMB one yuan coin
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
打印贴士:PLA或PETG都可以,拓竹2.0层厚的默认参数,变动内容:使用支撑,我在打印时设置了PETG作为PLA的支撑,使用AMS模块。(当然你也可以使用PLA作为PETG的支撑)设计时候没有给冗余,想法是可以把我的硬币卡进去,但发现有点过配合了,如果打印不好的话仅有一面可以卡硬币(对于变魔术来说足矣)
Google Traslation:
Printing tips: PLA or PETG are both acceptable, the default parameters of the layer thickness of Tuozhu 2.0, the content of changes: use support, I set PETG as the support of PLA when printing, and use the AMS module. (Of course, you can also use PLA as the support for PETG.) There is no redundancy in the design. The idea is that I can put my coins into it, but I found that it is a bit too cooperative. If the printing is not good, only one side can be used to hold coins (for variable It’s enough for magic)
V1:B站视频中初始版本:【3D打印魔术道具,小时候买过找不到了就自己画了个】 https://www.bilibili.com/video/BV1vu4y1D7vx/
V2:给硬币直径增加了0.1mm精度冗余空间,手柄适当加粗(考虑易于打印没有使用圆柱体),文件格式分别导出了Solidworks2021工程文件,igs文件,stl文件以及step文件(3D打印推荐使用step文件,虽然文件名在BambulabStudio里会乱码)
V1: The initial version in the B station video: [3D printed magic props, I bought them when I was a kid and couldn’t find them, so I drew one myself] https://www.bilibili.com/video/BV1vu4y1D7vx/
V2: Added 0.1mm precision redundant space to the diameter of the coin, the handle is appropriately thickened (no cylinder is used for ease of printing), and the file formats are exported to Solidworks2021 project files, igs files, stl files and step files (recommended for 3D printing) step file, although the file name will be garbled in BambulabStudio)
