SUP Drink Holder, Paddle Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drink holder designed to thread into your existing bungee system.
- Rating
- 5 / 5
- Likes
- 362
- Downloads
- 4,457
- Makes
- 16
- Views
- 15,905
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
UPDATE: 7/22/2025 YETI Colster/Koozie model added in the files section for standard diameter cans. If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier. Enjoy!
UPDATE: 7/19/2024 Skinny can model added in the files section, enjoy!
Here is your new SUP drink holder. It is designed for a standard 12 oz/ 355ml diameter can. I have included the step file to make remixing easier, so go sick! The design is meant to thread into the existing bungee system on your SUP. Lots of bungee = Lots of drinks (Choose your own adventure!)
Adding a box modifier in slicer as shown, and changing the infill density of the box to 100% will greatly increase durability. I also use 4 perimeters to increase wall strength.
Enjoy!