1 / 6
Robomow RC wheel and tire (and wheel spacer) — image 1
1 / 6

Robomow RC wheel and tire (and wheel spacer)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Robust wheels, removable tires with A LOT OF TRACTION and a wheel spacer to add even more traction in the turns.

Rating
5 / 5
Likes
6
Downloads
120
Makes
1
Views
659
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My Robomow RC304 has traction issues in one big slope. I tried the official Robomow Grips with official larger wheels but it was not satisfying enough. Those parts are not cheap and do not last long enough for me.

I tried also other wheels and tire design but keep breaking the wheels (that needed a lot of filament to print. So I make my own design : robust wheels, removable tires with A LOT OF TRACTION. 

I add a wheel spacer so the wheel has more leverage on the mower in the turns. The spacer is secured to the original wheel axle with one or two small m3 screws. 
To maintain the wheel in the spacer one m5 screw and a washer is needed. If the m5 screw is long enough (more than 40mm) it can reinforce the spacer and the original wheel axle. 

I use PETG for the wheels and TPU 53D for the tires and Carbon Fiber Nylon for the spacer (PETG is probably fine).

Everything is designed to be printable without support.

The clip to secure the wheel comes from : https://www.thingiverse.com/thing:4299007

Updated June 30 2025, my original wheel design still works great on the robot, but I wanted more traction… So I designed a larger version of wheel and tire (60mm wide). I didn't get a chance to test it out because lightning struck near my house and fried the robot!! 

Category: Replacement Parts

Tags