NR200/P Wi-Fi Antenna mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 x Wi-Fi Antenna mount for the NR200/P case, Uses the top cover mounting area as guide. Requires RP-SMA extenders.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
2 x Wi-Fi Antenna mount for the NR200/P case, Fits on the top cover mounting area to guide and uses the same hole for the screw as retainer.
Requires RP-SMA extenders/pigtails with a bulkhead female end (preferrably sub-1ft to minimize losses if you're not sure of the cables.)
Print upside down for zero supports. Also would warn there's a bit of loose tolerances on the file (around +.2mm on the holes and mounting area) as i printed primarily in ABS.
For a little bit of fun, i included a spoiler attachment for the antennas.
[UPDATE] Added a 2nd version that's more flush underneath/with the top cover part, for people using rear filters (to maximize coverage), as the original will be protruding a little bit further down.