Magnetic Reverse Bowden Adapter MK3S w/insert (MK3s+ Cowboy Hat)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really like the OG version of this, unfortunately the threading didn't work in my situation so I added an insert.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is basically the same design of the OG design, but with a topper added to accommodate an M5 heated insert. It just so happens that it made it look like a little cowboy hat for the extruder.
You will still need the bottom piece from the OG post. Please go there to download it.
For whatever reason the thread in the OG design didn't work for me so I wanted to add in a heated insert. I modeled this up and it seems to do the trick!
The exact threaded insert measurements I used were 7.1 x 9.5mm. Threaded for M5.
The ones I used are found here (https://www.amazon.de/-/en/ruthex-Threaded-Insert-Assortment-Box/dp/B08K1BVGN9/ref=sr_1_11?crid=VDZWM1B5NHR2&keywords=threaded%2Bheat%2Binsert&qid=1693515386&sprefix=threaded%2Bheat%2Binser%2Caps%2C85&sr=8-11&th=1)
Please let me know your thoughts.