1 / 3
1 1/4" (1.25) in U-Bolt Saddle Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket allows a pipe of up to 1 1/4" (1.25 in) to be mounted to a flat surface. Designed for a 5/16" U-bolt.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 1
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
A 3D-printed saddle bracket for a 1 1/14" (1.25 in) 5/16" u-bolt. Typically, this part will have a lot of force on it, so you need to print it to withstand vertical as well as twisting forces. My first pass at this (not yet tested under load) is the following:
- 0.28 layer height with a 0.4 nozzle
- 4 wall loops
- 1.12 mm top and bottom thickness (4 layers)
- 30% infill using Gyroid pattern
If this will be placed outside, then ASA is the preferred material. Use the filament type appropriate to your application.
Designed in Fusion360.