JeSc HyperCube 2020 Corner Brackets v1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have not printed these and tried them out, but I designed these for a future build of the HyperCube model.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I have not printed these and tried them out, but I designed these for a future build of the HyperCube model.
For the total build you need 16 Normal brackets and the special brackets I designed. They should work with the Tech2C parts.
If you print them sooner than I do myself, please leave me a message that they work (or not) :)
Use PLA+ (plus!) with 75% infill so that they are strong enough.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9MQad9Z564G
Print instructions
Category: 3D Printing Summary
I have not printed these and tried them out, but I designed these for a future build of the HyperCube model.
For the total build you need 16 Normal brackets and the special brackets I designed. They should work with the Tech2C parts.
If you print them sooner than I do myself, please leave me a message that they work (or not) :)
Use PLA+ (plus!) with 75% infill so that they are strong enough.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9MQad9Z564G
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
</div>Supports:No
Resolution:
0.16
</div>Infill:75%
Notes:
I use eSun PLA+ 90/212 temps.