1 / 1
SuperDude Antenna Ground Spike Mount for Ham and CB Radio
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I printed this with PETG at 99 percent infill. 99 percent is for strength, as this object will have a bit of play. It…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I printed this with PETG at 99 percent infill. 99 percent is for strength, as this object will have a bit of play. It seems to be holding up okay, but in the future, I will have a 3 spike design available.
I have updated the design already to V2.2. This adds a gusset to the mount for strength. Printing is about 4.5 hours and I will be testing it for the next day or two.
Video can be found here along with a parts list - https://youtu.be/2WrXJstRPEA
Category: Electronics