1 / 2
Pandaplacer Y gantry fan shroud
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fan shroud that is used to cool down the X axis stepper stick. It uses a 4010 24v blower fan.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
FreeCAD source included.
Installation is simple:
- slide the fan inside, with the wire oriented toward the cut
- slide the shroud over the motor
You'll have to use the 24v/gnd from the stepper stick pins on the back of the PCB. (lower right corner, check the silkscreen for pinout)
A right angle pin header works fine.