1 / 2
Commercial Buffer Tube Vice Block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4in vice block for a commercial buffer tube
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 242
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 4in vice block for a commercial buffer tube. This block fits tightly onto commercial tubes but will not fit properly on mil-spec tubes. I have also made a mil-spec block that can be found here.
No supports are needed and speeds/feeds/resolution don't really matter. Just make sure you get good adhesion between layers and a relatively dense infill to prevent breaks while in the vice.
