EKO Regent Treteimer (20L) Bin Lids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of customised bin lids to make Mülltrennung fun and stylish!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Have you ever wanted a stylish solution for sorting your trash, but didn't want to compromise by buying those tiny all-in-one bins, or leaving a yellow sack on the ground for your recyclables!? …Yeah, me neither!!!!
With this model, you can buy a regular EKO Regent bin, remove the black plastic (square-ish) ring that comes as standard on top, and replace it with a nice stylish name plate that tells you what goes where! 👍
This is the bin: https://www.schrankeinrichten.de/eko-regent-treteimer-20-liter/. Note: I originally bought it at Bauhaus, but it's no longer available there.
The individual pieces need to be super-glued into place for this build. Make sure that if you use Super-Glue, you don't leave the printed model face-down while the glue is drying. Also inadvisable is clamping the models to something rigid, to hold them securely. The vapours from the Super-Glue discoloured the black finish on the “Restmüll” model, as you can see. For the other two, I pressed them together and then left them dry in open air. Here you don't see any vapour discolouring.