Wago 221-415 angled clip mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.23 net (excluding VAT)
For file: Wago 221-415 angle clip_0.4n_0.3mm_PLA_MK4_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 14.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
m3 screw down mount for the Wago 221-415 (20amp)
- Rating
- 4.667 / 5
- Likes
- 36
- Downloads
- 364
- Makes
- 3
- Views
- 1,178
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts.
If using this with high voltages or current, you should probably print it in something like https://www.prusa3d.com/product/prusament-petg-v0-natural-1kg/