1 / 5
V0.2 xy joint pins mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mod to use 4 3x20mm steel pins in the xy joints to mount the bearing stacks without need for any spacers or washers.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 124
- Makes
- 4
- Views
- 1,071
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
No Supports!
Each side prints in one piece with a modeled in bridge that will need to be cut out after printing. No need for any heat set inserts or spacers, just slide the bearing stacks in and press the 3mm pin into the part. A 2mm hole on the opposite end of each pin hole can be used to remove the pins if needed.
Bom-
4x 3x20mm pins (same as the bmg idler shaft)
Pins used- https://www.amazon.com/gp/product/B07MDFRS13/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1