Wago 2 x 221-412 + 1 x 221-413 angled V clip mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V shaped m3 screw down mount for a cluster of 2x2way and 1x3way Wago 221s.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 0
- Views
- 513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Edit: In the end, I found the V shape inconvenient, when wiring into it from straight above it was too easy for wire tension to pull the Wago connector loose. I still consider this useful (and cool looking) as a loose hookup wire junction, but I use https://www.printables.com/model/597817-wago-back-to-back-221-412x2-221-413x1-clip for bringing in mains power cables.
Use m3 screws mount up enough Wagos to bring single phase mains power into a project box. The three way connector covers connecting the chassis to ground. There is a mounting hole diagram in the pics.
Also, it's frankly cool looking.
If using this with high voltages or current, you should probably print it in something like https://www.prusa3d.com/product/prusament-petg-v0-natural-1kg/