1 / 3
Pen Holder - for 16 Color Felt Tip Pens — image 1
1 / 3

Pen Holder - for 16 Color Felt Tip Pens

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made this specifically for Papermate Flair 0.7mm felt tip pens, sold in a package of 16 assorted colors.

Rating
0 / 5
Likes
9
Downloads
101
Makes
1
Views
651
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

Made this specifically for Papermate Flair 0.7mm felt tip pens, sold in a package of 16 assorted colors. Basically just a compact, no-nonsense holder for 16 felt tip pens. Note however, that the pens are held "splayed out" so that the colors are easy to see, and the pens are easy to get at.

This might work with other pens as well. The Papermate pens have a small diameter of 8.25mm, and when measured 55mm from the end have a diameter of 9.87mm. I made the opening for the pens oversize by 1mm. Pens fitting within these dimensions will work, and of course the print can also be scaled.

A simple "test block" is included which can be printed to test pen fit.

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/1395b8c58cfa9e1728f934b3/w/293067a9dd49f51b6ed655a4/e/89375da839a9e901cf6c3259

Print instructions

Print in PLA using the 3MF files provided; otherwise:

  • perimeters = 2
  • 0% infill