Lathe Bedcover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for Emco Maximat Super 11
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 50
- Makes
- 0
- Views
- 1,497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To protect the lathebed of my Emco Maximat Super 11 a made a cover mainly from old leather (idea by Stefan Gotteswinter). It uses two existing holes in the headstock casting and mounts on the DRO X-cover on the other side.
I cut the leather for the bedcover to 500 x 200 mm - if longer travel is needed, I can just loosen the clamp and pop out the rail on the headstock side.
Also made a motor protection from leather which is held on the bedcover and with a clamp on the casting.
You will need 2 sets of bars.
Hardware
Leather
21 M4 x 10 mm Countersunk screws
4 M4 x 25 mm Countersunk Screws
1 M4 x 25 mm Socket Head Screws
1 M5 x 16 mm Button Head Screw