Urban Arrow Step
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Middle step to help kids get into the Urban Arrow. Especially helpful when the rain cover is installed.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 218
- Makes
- 4
- Views
- 2,014
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The top piece can be used to make sure your alignment holes will work, before printing the big step.
I'd recommend printing this in PETG or ASA with adhesion. Infill at least 60. You will need some long M6 bolts and nuts from your hardware store.
I don't think the top is really required, I did it for my original to act a bit as a washer/alignment plate but my friends didn't use it when they printed theirs.
For what it's worth, a friend printed one in PLA @ 30% hexagonal grid with a wall count of 5 and has had success. PLA won't be great for UV resistance but maybe works just fine for many years.
Obviously make sure the step feels sturdy and secure for a childs weight and check it periodically.