1 / 1
Kingroon Kp5M/Kp5L Fan mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a side fan mount if you are planning to remove the shroud that comes with the kp5m.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I removed the shroud that came with my kp5m (same as L) as I installed a Trianglelabs BMG/Phateus hot end combo.
I used a 40mm fan for the phateus so the stock sheet metal wasn't working so I removed it. That being said the fan has nowhere to go.
I designed this so it can fit on the right side (not hitting limit switch) and gives you sufficient angle to use a small duct that slides in the fan